-- *****************************************************************
-- CISCO-WAN-ATM-CONN-CAPABILITY MIB
--
-- AGENT-CAPABILITIES MIB for CISCO-WAN-ATM-CONN-MIB.
--
-- February 2004, Rajesh Goudar
--
-- Copyright(c) 2002,2004 by Cisco Systems,Inc.
--
-- *****************************************************************CISCO-WAN-ATM-CONN-CAPABILITY DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,Unsigned32FROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
ciscoAgentCapability
FROM CISCO-SMI;ciscoWanAtmConnCapability MODULE-IDENTITYLAST-UPDATED"200402070000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"DESCRIPTION"The agent capabilities for CISCO-WAN-ATM-CONN-MIB
in MGX8800 Series.
- The capability cwAtmConnCapabilityAxsmV2R0160
is for AXSM in MGX Release 2.1.60.
- The capability cwAtmConnCapabilityAxsmeV2R0160
is for AXSM-E in MGX Release 2.1.60.
- The capability cwAtmConnCapabilityRpmprV2R0160
is for RPM-PR in MGX Release 2.1.60.
- The capability cwAtmConnCapabilityBpxsesV3R00
is for AXSM in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityAxsmV3R00
is for AXSM in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityAxsmeV3R00
is for AXSM-E in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityPxm1eV3R00
is for AXSM-E in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityRpmprV3R00
is for RPM-PR in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityRpmxfV12R02
is for RPM-XF in MGX Release 3.0.00.
- The capability cwAtmConnCapabilityV5R00
is for MPSM155 & VXSM in MGX Release 5.0.00."REVISION"200402070000Z"DESCRIPTION"Added cwAtmConnCapabilityV5R00 for MPSM155 & VXSM cards"REVISION"200203260000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoAgentCapability 380}cwAtmConnCapabilityAxsmV2R0160 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 2.1.60."
STATUScurrentDESCRIPTION"Agent capabilities for ATM Switch
Service Module(AXSM)."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan2MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory,
cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi,
cwaChanRemoteVci,
cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus."VARIATION cwaChanControllerId
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the controller
id configured in the shelf."
VARIATION cwaChanPCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION
"Write supported with restricted range."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..5651320)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5360000)
DESCRIPTION"Write supported with restricted range."VARIATION cwaChanPercentUtil
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanRemotePercentUtil
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."
VARIATION cwaChanIntAbrVSVD
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanExtAbrVSVD
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanAisIWCapability
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanRemoteCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanTestType
SYNTAXINTEGER{ noLpbk(1), nonDestructive(3)}
DESCRIPTION"Does not support the value destructive(2)."VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..1)DESCRIPTION"Only supported value is 1."::={ ciscoWanAtmConnCapability 1}cwAtmConnCapabilityAxsmeV2R0160 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 2.1.60"STATUScurrentDESCRIPTION"Agent capabilities for Enhanced AXSM(AXSM-E)."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan2MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory, cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus."VARIATION cwaChanControllerId
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the controller
id configured in the shelf."VARIATION cwaChanPCR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..1412830)
DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..1412830)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5360000)DESCRIPTION"Write supported with restricted range."VARIATION cwaChanPercentUtil
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."
VARIATION cwaChanRemotePercentUtil
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."VARIATION cwaChanAbrVSVDEnable
ACCESSnot-implementedDESCRIPTION"Not supported."VARIATION cwaChanAbrERS
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanAisIWCapability
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanRemoteCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanTestType
SYNTAXINTEGER{ noLpbk(1), nonDestructive(3)}DESCRIPTION"Does not support the value destructive(2)."VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..1)DESCRIPTION"Only supported value is 1."::={ ciscoWanAtmConnCapability 2}cwAtmConnCapabilityRpmprV2R0160 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 2.1.60"STATUScurrentDESCRIPTION"Agent capabilities for RPM-PR module."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan2MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory, cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus."VARIATION cwaChanVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"For VCCs, only value zero is supported."VARIATION cwaChanVci
SYNTAXUnsigned32(1..3808)DESCRIPTION"For VCCs only."VARIATION cwaChanServiceCategory
SYNTAXINTEGER{ vbr3nRT(7),ubr1(8),abr(10)}
DESCRIPTION"Does not support cbr1(1), vbr1RT(2), vbr2RT(3),
vbr3RT(4), vbr1nRT(5), vbr2nRT(6), ubr2(9),
cbr2(11), cbr3(12)."VARIATION cwaChanIdentifier
SYNTAXUnsigned32(17..4095)DESCRIPTION"For VCCs supported range is 17-3824.
For VPCs supported range is 3841-4095."VARIATION cwaChanStatsEnable
DESCRIPTION"Read returns value false(2).
Write operation is ignored."VARIATION cwaChanLocalVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"For VCCs the VPI value must be zero."VARIATION cwaChanLocalVci
SYNTAXUnsigned32(1..3808)
DESCRIPTION"This is the valid range for VCCs."VARIATION cwaChanRemoteVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"For VCCs the VPI value must be zero."VARIATION cwaChanRemoteVci
SYNTAXUnsigned32(1..3808)DESCRIPTION"This is the valid range for VCCs."VARIATION cwaChanCCEnable
ACCESSread-onlyDESCRIPTION"Read returns value false(2).
Write operation is not supported."VARIATION cwaChanFrameDiscard
DESCRIPTION"Read returns value false(2).
Write operation is ignored."VARIATION cwaChanPCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanCDV
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."
VARIATION cwaChanCTD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanMBS
SYNTAXUnsigned32(1..65535)DESCRIPTION"Only limited range is supported."VARIATION cwaChanCDVT
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..353208)
DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteCDV
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCTD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrICR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrADTF
ACCESSread-only
DEFVAL{50}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrRIF
ACCESSread-onlyDEFVAL{ oneOver16 }DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrNRM
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTRM
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrCDF
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrFRTT
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTBE
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrERS
DESCRIPTION"Write operation is ignored."VARIATION cwaChanAbrVSVDEnable
DESCRIPTION"Write operation is ignored."VARIATION cwaChanIntAbrVSVD
DESCRIPTION"Write operation is ignored."VARIATION cwaChanExtAbrVSVD
DESCRIPTION"Write operation is ignored."VARIATION cwaChanAisIWCapability
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanCLR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCLR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanEgressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanEgressRcvState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressRcvState
DESCRIPTION"Always returns value zero."::={ ciscoWanAtmConnCapability 3}cwAtmConnCapabilityBpxsesV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"BPX SES Release 3.0.00"
STATUScurrentDESCRIPTION"Agent capabilities for BPX SES."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory,
cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi,
cwaChanRemoteVci,
cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus."VARIATION cwaChanMaxCost
SYNTAXUnsigned32(0..134217727)DESCRIPTION"Supported with Restricted range."
VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5000000)DESCRIPTION"Supported with Restricted range."VARIATION cwaChanCCEnable
ACCESSread-onlyDESCRIPTION"Write Operation not Supported."VARIATION cwaChanPCR
SYNTAXUnsigned32(6..4294967295)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(6..4294967295)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(6..4294967295)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(6..4294967295)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(6..4294967295)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(6..4294967295)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMBS
DEFVAL{1024}
DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrADTF
DEFVAL{50}DESCRIPTION""VARIATION cwaChanAbrRDF
DEFVAL{ oneOver4096 }DESCRIPTION""VARIATION cwaChanAbrRIF
DEFVAL{ oneOver512 }DESCRIPTION""VARIATION cwaChanAbrNRM
DEFVAL{ nrm32 }DESCRIPTION""VARIATION cwaChanAbrTRM
DEFVAL{ trm100 }DESCRIPTION""VARIATION cwaChanAbrCDF
DEFVAL{ cdfOneOver2 }DESCRIPTION""VARIATION cwaChanAbrFRTT
DEFVAL{0}DESCRIPTION""VARIATION cwaChanAbrTBE
DEFVAL{1048320}DESCRIPTION""VARIATION cwaChanIntAbrVSVD
ACCESSread-onlyDESCRIPTION"Write operation not supported."VARIATION cwaChanExtAbrVSVD
ACCESSread-onlyDESCRIPTION"Write operation not supported."VARIATION cwaChanOamSegEpEnable
DEFVAL{ oamSegEp }DESCRIPTION""VARIATION cwaChanEgressXmtState
DESCRIPTION"Set to value 0 always."VARIATION cwaChanEgressRcvState
DESCRIPTION"Set to value 0 always."VARIATION cwaChanIngressXmtState
DESCRIPTION"Set to value 0 always."VARIATION cwaChanIngressRcvState
DESCRIPTION"Set to value 0 always."::={ ciscoWanAtmConnCapability 4}cwAtmConnCapabilityAxsmV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 3.0.00."
STATUScurrentDESCRIPTION"Agent capabilities for AXSM module."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory,
cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi,
cwaChanRemoteVci,
cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus."VARIATION cwaChanServiceCategory
DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanVpcFlag
DEFVAL{ false }
DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanControllerId
SYNTAXUnsigned32(1..20)DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanFrameDiscard
DESCRIPTION"Can not configure when cwaChanVpcFlag = 'true'"VARIATION cwaChanPCR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..5651320)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."
VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..5651320)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5000000)DEFVAL{250000}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..5651320)ACCESSread-onlyDEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrADTF
ACCESSread-onlyDEFVAL{50}DESCRIPTION""VARIATION cwaChanAbrRDF
ACCESSread-onlyDEFVAL{ oneOver4096 }DESCRIPTION""VARIATION cwaChanAbrRIF
ACCESSread-onlyDEFVAL{ oneOver512 }DESCRIPTION""VARIATION cwaChanAbrNRM
ACCESSread-onlyDEFVAL{ nrm32 }DESCRIPTION""VARIATION cwaChanAbrTRM
ACCESSread-onlyDEFVAL{ trm100 }
DESCRIPTION""VARIATION cwaChanAbrCDF
ACCESSread-onlyDEFVAL{ cdfOneOver2 }DESCRIPTION""VARIATION cwaChanAbrFRTT
ACCESSread-onlyDEFVAL{0}DESCRIPTION""VARIATION cwaChanAbrTBE
ACCESSread-onlyDEFVAL{1048320}DESCRIPTION""VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."VARIATION cwaChanIntAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanExtAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanRemoteCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanOamSegEpEnable
DEFVAL{ oamSegEp }DESCRIPTION"Default value depends upon the switch configuration "VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..100)DESCRIPTION"Restricted range is supported."::={ ciscoWanAtmConnCapability 5}cwAtmConnCapabilityAxsmeV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 3.0.00."STATUScurrent
DESCRIPTION"Agent capabilities for AXSM-E module."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory, cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer Description of cwaChanRowStatus."VARIATION cwaChanServiceCategory
DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanVpcFlag
DEFVAL{ false }DESCRIPTION"Write Operation is ignored on an existing connection."
VARIATION cwaChanControllerId
SYNTAXUnsigned32(1..20)DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanFrameDiscard
DESCRIPTION"Can not configure when cwaChanVpcFlag = 'true'"VARIATION cwaChanPCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..1412830)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..1412830)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMBS
DEFVAL{1024}
DESCRIPTION"Write supported with restricted range."VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5000000)DEFVAL{250000}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrADTF
DEFVAL{50}DESCRIPTION""VARIATION cwaChanAbrRDF
DEFVAL{ oneOver4096 }DESCRIPTION""VARIATION cwaChanAbrRIF
DEFVAL{ oneOver512 }DESCRIPTION""VARIATION cwaChanAbrNRM
DEFVAL{ nrm32 }DESCRIPTION""VARIATION cwaChanAbrTRM
DEFVAL{ trm100 }DESCRIPTION""VARIATION cwaChanAbrCDF
DEFVAL{ cdfOneOver2 }DESCRIPTION""VARIATION cwaChanAbrFRTT
DEFVAL{0}
DESCRIPTION""VARIATION cwaChanAbrTBE
DEFVAL{1048320}DESCRIPTION""VARIATION cwaChanAbrVSVDEnable
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."
VARIATION cwaChanIntAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanExtAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanRemoteCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanOamSegEpEnable
DEFVAL{ oamSegEp }
DESCRIPTION"Default value depends upon the switch configuration "VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..100)DESCRIPTION"Restricted range is supported."::={ ciscoWanAtmConnCapability 6}cwAtmConnCapabilityPxm1eV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 3.0.00."STATUScurrentDESCRIPTION"Agent capabilities for PXM1-E module."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory, cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer Description of cwaChanRowStatus."VARIATION cwaChanServiceCategory
DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanVpcFlag
DEFVAL{ false }DESCRIPTION"Write Operation is ignored on an existing connection."VARIATION cwaChanControllerId
SYNTAXUnsigned32(1..20)DESCRIPTION"Write Operation is ignored on an existing connection."
VARIATION cwaChanFrameDiscard
DESCRIPTION"Can not configure when cwaChanVpcFlag = 'true'"VARIATION cwaChanPCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..1412830)
DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..1412830)DEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanRemoteMBS
DEFVAL{1024}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5000000)DEFVAL{250000}
DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..1412830)ACCESSread-onlyDEFVAL{50}DESCRIPTION"Write supported with restricted range."VARIATION cwaChanAbrADTF
ACCESSread-onlyDEFVAL{50}DESCRIPTION""VARIATION cwaChanAbrRDF
ACCESSread-onlyDEFVAL{ oneOver4096 }
DESCRIPTION""VARIATION cwaChanAbrRIF
ACCESSread-onlyDEFVAL{ oneOver512 }DESCRIPTION""VARIATION cwaChanAbrNRM
ACCESSread-onlyDEFVAL{ nrm32 }DESCRIPTION""VARIATION cwaChanAbrTRM
ACCESSread-onlyDEFVAL{ trm100 }DESCRIPTION""VARIATION cwaChanAbrCDF
ACCESSread-onlyDEFVAL{ cdfOneOver2 }DESCRIPTION""
VARIATION cwaChanAbrFRTT
ACCESSread-onlyDEFVAL{0}DESCRIPTION""VARIATION cwaChanAbrTBE
ACCESSread-onlyDEFVAL{1048320}DESCRIPTION""VARIATION cwaChanAbrVSVDEnable
DESCRIPTION"The value specified in write operation is
ignored. The read operation returns the default value."VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."VARIATION cwaChanIntAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanExtAbrVSVD
DEFVAL{ vsvdOff }DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanRemoteCLR
DESCRIPTION"The value specified in write operation is ignored.
The read operation returns the default value."VARIATION cwaChanOamSegEpEnable
DEFVAL{ oamSegEp }DESCRIPTION"Default value depends upon the switch configuration "VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..100)DESCRIPTION"Restricted range is supported."::={ ciscoWanAtmConnCapability 7}cwAtmConnCapabilityRpmprV3R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 3.0.00"STATUScurrentDESCRIPTION"Agent capabilities for RPM-PR module."
SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanVpcFlag, cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer Description of cwaChanRowStatus."VARIATION cwaChanVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"For VCCs, only value zero is supported."VARIATION cwaChanVci
SYNTAXUnsigned32(1..3808)
DESCRIPTION"For VCCs only."VARIATION cwaChanServiceCategory
SYNTAXINTEGER{ vbr3nRT(7),ubr1(8),abr(10)}DEFVAL{ ubr1 }DESCRIPTION"Does not support cbr1(1), vbr1RT(2), vbr2RT(3),
vbr3RT(4), vbr1nRT(5), vbr2nRT(6), ubr2(9),
cbr2(11), cbr3(12)."VARIATION cwaChanIdentifier
SYNTAXUnsigned32(17..4095)DESCRIPTION"For VCCs supported range is 17-3824.
For VPCs supported range is 3841-4095."VARIATION cwaChanStatsEnable
DESCRIPTION"Read returns value false(2).
Write operation is ignored."VARIATION cwaChanCCEnable
ACCESSread-onlyDESCRIPTION"Read returns value false(2).
Write operation is not supported."VARIATION cwaChanLocalVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"For VCCs the VPI Value Must be zero."VARIATION cwaChanLocalVci
SYNTAXUnsigned32(1..3808)DESCRIPTION"This is the valid range for VCCs."VARIATION cwaChanRemoteVpi
SYNTAXUnsigned32(0..255)
DESCRIPTION"For VCCs the VPI Value Must be zero."VARIATION cwaChanRemoteVci
SYNTAXUnsigned32(1..3808)DESCRIPTION"This is the valid range for VCCs."VARIATION cwaChanControllerId
DEFVAL{2}DESCRIPTION"Controller Id(PNNI) is selected by default."VARIATION cwaChanFrameDiscard
ACCESSread-onlyDESCRIPTION"Read returns value false(2).
Write operation is ignored."VARIATION cwaChanPCR
SYNTAXUnsigned32(7..353208)
DEFVAL{353208}DESCRIPTION""VARIATION cwaChanMCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanSCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..353208)DEFVAL{353208}DESCRIPTION"Only limited range is supported."
VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..353208)DESCRIPTION"Only limited range is supported."VARIATION cwaChanMBS
SYNTAXUnsigned32(1..65535)DEFVAL{94}DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteMBS
SYNTAXUnsigned32(1..65535)
DEFVAL{94}DESCRIPTION"Only limited range is supported."VARIATION cwaChanCDV
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCDV
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanCTD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCTD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanCDVT
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrICR
SYNTAXUnsigned32(7..353208)ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrADTF
ACCESSread-onlyDEFVAL{50}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrRIF
ACCESSread-onlyDEFVAL{ oneOver16 }DESCRIPTION"Object cannot be created or modified."
VARIATION cwaChanAbrNRM
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTRM
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrCDF
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrFRTT
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTBE
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrVSVDEnable
ACCESSread-onlyDESCRIPTION"Write operation is ignored."
VARIATION cwaChanIntAbrVSVD
ACCESSread-onlyDESCRIPTION"Write operation is ignored."VARIATION cwaChanExtAbrVSVD
ACCESSread-onlyDESCRIPTION"Write operation is ignored."VARIATION cwaChanCLR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCLR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanOamSegEpEnable
DEFVAL{ oamSegEp }DESCRIPTION""VARIATION cwaChanSlaveType
ACCESSnot-implemented
DESCRIPTION"This object is not supported."VARIATION cwaChanRoutingPriority
ACCESSnot-implementedDESCRIPTION"This object is not supported."VARIATION cwaChanEgressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanEgressRcvState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressRcvState
DESCRIPTION"Always returns value zero."::={ ciscoWanAtmConnCapability 8}cwAtmConnCapabilityRpmxfV12R02 AGENT-CAPABILITIESPRODUCT-RELEASE"IOS Release 12.2
in MGX8850 Release 3.0.00"STATUScurrentDESCRIPTION"Agent capabilities for RPM-XF module."SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{ ciscoWanAtmConnChan3MIBGroup,
ciscoWanAtmConnStateGroup }VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanVpcFlag,cwaChanRoutingMastership,
cwaChanRemoteVpi, cwaChanRemoteVci, cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer Description of cwaChanRowStatus."VARIATION cwaChanVpi
SYNTAXUnsigned32(0..240)DESCRIPTION"For VPCs value 0 is not supported."
VARIATION cwaChanVci
SYNTAXUnsigned32(32..65535)DESCRIPTION"Only limited range is supported.
For VPCs, only value 0 is supported."VARIATION cwaChanServiceCategory
SYNTAXINTEGER{ vbr3RT(4),vbr3nRT(7),ubr1(8)}DEFVAL{ ubr1 }DESCRIPTION"Does not support cbr1(1), vbr1RT(2), vbr2RT(3),
vbr1nRT(5), vbr2nRT(6), ubr2(9), abr(10),
cbr2(11), cbr3(12)."VARIATION cwaChanControllerId
DEFVAL{2}
DESCRIPTION"Controller Id(PNNI) is selected by default."VARIATION cwaChanStatsEnable
ACCESSread-onlyDESCRIPTION"Read returns value false(2).
Write operation is not supported."VARIATION cwaChanLocalVpi
SYNTAXUnsigned32(0..240)DESCRIPTION"For VPCs, value 0 is not supported."VARIATION cwaChanLocalVci
SYNTAXUnsigned32(32..65535)DESCRIPTION"For VCCs only."VARIATION cwaChanRemoteVpi
SYNTAXUnsigned32(0..255)
DESCRIPTION"For VPCs, value 0 is not supported."VARIATION cwaChanRemoteVci
SYNTAXUnsigned32(32..65535)DESCRIPTION"For VCCs, range is 32..65535.
For VPCs, only value 0 is supported."VARIATION cwaChanCCEnable
ACCESSread-onlyDESCRIPTION"Read returns value false(2).
Write operation is not supported."VARIATION cwaChanFrameDiscard
DESCRIPTION"Read returns value false(2).
Write operation is ignored."VARIATION cwaChanPCR
SYNTAXUnsigned32(3..2824661)DEFVAL{2824661}
DESCRIPTION"Only limited range is supported."VARIATION cwaChanMCR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanSCR
SYNTAXUnsigned32(3..2824661)DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(3..2824661)DESCRIPTION"Only limited range is supported.
Default value is same as cwaChanPCR."VARIATION cwaChanRemoteMCR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."
VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(3..2824661)DESCRIPTION"Only limited range is supported.
Default value is same as cwaChanSCR."VARIATION cwaChanCDV
ACCESSread-onlyDEFVAL{16777215}-- 0xFFFFFFDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCDV
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanCTD
ACCESSread-onlyDEFVAL{65535}-- 0xFFFF
DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCTD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanMBS
SYNTAXUnsigned32(1..65535)DEFVAL{94}DESCRIPTION"Only limited range is supported."VARIATION cwaChanRemoteMBS
SYNTAXUnsigned32(1..65535)DEFVAL{94}DESCRIPTION"Only limited range is supported.
Default value is same as cwaChanMBS."VARIATION cwaChanCDVT
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrICR
ACCESSread-onlyDEFVAL{7}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrADTF
ACCESSread-onlyDEFVAL{50}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrRDF
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrRIF
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrNRM
ACCESSread-onlyDEFVAL{ nrm32 }DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTRM
ACCESSread-onlyDEFVAL{ trm100 }DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrCDF
ACCESSread-onlyDEFVAL{ cdfOneOver16 }DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrFRTT
ACCESSread-only
DEFVAL{16700000}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrTBE
ACCESSread-onlyDEFVAL{16777215}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanAbrVSVDEnable
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRowStatus
SYNTAXINTEGER{
active(1),
notInService(2),
createAndGo(4),
destroy(6)
}DESCRIPTION"Does not support notReady(3) and createAndWait(5)."VARIATION cwaChanIntAbrVSVD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanExtAbrVSVD
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanCLR
ACCESSread-onlyDEFVAL{6}DESCRIPTION"Object cannot be created or modified."VARIATION cwaChanRemoteCLR
ACCESSread-onlyDESCRIPTION"Object cannot be created or modified."VARIATION cwaChanEgressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanEgressRcvState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressXmtState
DESCRIPTION"Always returns value zero."VARIATION cwaChanIngressRcvState
DESCRIPTION"Always returns value zero."::={ ciscoWanAtmConnCapability 9}cwAtmConnCapabilityV5R00 AGENT-CAPABILITIESPRODUCT-RELEASE"MGX8850 Release 5.0.00."STATUScurrentDESCRIPTION"Agent capabilities for MPSM155 and
Voice Switch Service Module - VXSM"SUPPORTS CISCO-WAN-ATM-CONN-MIB
INCLUDES{
ciscoWanAtmConnChan4MIBGroup,
ciscoWanAtmConnStateGroup
}--
-- Variations applicable for MPSM155
--VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory,
cwaChanVpcFlag,
cwaChanRoutingMastership,
cwaChanRemoteVpi,
cwaChanRemoteVci,
cwaChanRemoteNSAPAddr }DESCRIPTION"Refer to description of cwaChanRowStatus."--
-- Variations applicable for VXSM
--VARIATION cwAtmChanCnfgEntry
CREATION-REQUIRES{
cwaChanServiceCategory,
cwaChanRoutingMastership,
cwaChanRemoteVpi,
cwaChanRemoteVci,
cwaChanRemoteNSAPAddr
}DESCRIPTION"Refer description of cwaChanRowStatus.
The following objects are allowed to be
modified at master end point:
cwaChanMBS
cwaChanRemoteMBS
cwaChanCDV
cwaChanRemoteCDV
"--
-- Variations applicable for VXSM
--VARIATION cwaChanServiceCategory
SYNTAXINTEGER{
cbr1 (1),
vbr1RT (2),
vbr1nRT(5),
vbr3nRT(7),
ubr1 (8)}DESCRIPTION"Limited data values are supported"--
-- Variations applicable for VXSM
--VARIATION cwaChanVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"Valid range is 0 to 255."--
-- Variations applicable for VXSM
--VARIATION cwaChanLocalVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"Valid range is 0 to 255."--
-- Variations applicable for VXSM
--VARIATION cwaChanRemoteVpi
SYNTAXUnsigned32(0..255)DESCRIPTION"Valid range is 0 to 255."--
-- Variations applicable for MPSM155
--VARIATION cwaChanControllerId
SYNTAXUnsigned32(1..20)
DESCRIPTION"This object cannot be modified
after the row is created."--
-- Variations applicable for VXSM
--VARIATION cwaChanControllerId
SYNTAXUnsigned32(2..2)DEFVAL{2}DESCRIPTION"Only support PNNI."--
-- Variations applicable for VXSM
--VARIATION cwaChanVpcFlag
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanPCR
SYNTAXUnsigned32(10..104268)
DEFVAL{50}DESCRIPTION"Rate limited to T3 due to hardware
limitation"--
-- Variations applicable for VXSM
--VARIATION cwaChanPCR
SYNTAXUnsigned32(7..2600000)DEFVAL{50}DESCRIPTION"Write supported with restricted range.
Default value is 50."--
-- Variations applicable for MPSM155
--VARIATION cwaChanMCR
SYNTAXUnsigned32(10..104268)DESCRIPTION"Default set to cwaChanPCR"--
-- Variations applicable for VXSM
--VARIATION cwaChanMCR
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanSCR
SYNTAXUnsigned32(10..104268)DESCRIPTION"Default set to cwaChanPCR"--
-- Variations applicable for VXSM
--VARIATION cwaChanSCR
SYNTAXUnsigned32(7..2600000)DEFVAL{50}DESCRIPTION"Write supported with restricted range.
Default value is 50."--
-- Variations applicable for MPSM155
--VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(10..104268)DEFVAL{50}DESCRIPTION"Rate limited to T3 due to hardware
limitation"--
-- Variations applicable for VXSM
--VARIATION cwaChanRemotePCR
SYNTAXUnsigned32(7..2600000)DEFVAL{50}DESCRIPTION"Write supported with restricted range.
Default value is 50."--
-- Variations applicable for MPSM155
--VARIATION cwaChanRemoteMCR
SYNTAXUnsigned32(10..104268)
DESCRIPTION"Default set to cwaChanRemotePCR"--
-- Variations applicable for VXSM
--VARIATION cwaChanRemoteMCR
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(10..104268)DESCRIPTION"Default set to cwaChanRemotePCR"--
-- Variations applicable for VXSM
--VARIATION cwaChanRemoteSCR
SYNTAXUnsigned32(7..2600000)DEFVAL{50}
DESCRIPTION"Write supported with restricted range.
Default value is 50."--
-- Variations applicable for MPSM155
--VARIATION cwaChanCDVT
SYNTAXUnsigned32(1..5000000)DEFVAL{250000}DESCRIPTION"Write supported with restricted range."--
-- Variations applicable for VXSM
--VARIATION cwaChanCDVT
SYNTAXUnsigned32(0..5000000)DEFVAL{250000}DESCRIPTION"Write supported with restricted range.
Default value is 250000."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrICR
SYNTAXUnsigned32(10..104268)DESCRIPTION"Default set to cwaChanPCR"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrICR
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrADTF
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrADTF
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrRDF
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrRDF
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrRIF
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrRIF
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrNRM
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrNRM
ACCESSnot-implemented
DESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrTRM
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrTRM
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrCDF
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrCDF
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrFRTT
DESCRIPTION"Default taken from PNNI controller"
--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrFRTT
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrTBE
DESCRIPTION"Default taken from PNNI controller"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrTBE
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for MPSM155
--VARIATION cwaChanAbrVSVDEnable
ACCESSnot-implementedDESCRIPTION"This object is not supported"--
-- Variations applicable for VXSM
--VARIATION cwaChanAbrVSVDEnable
ACCESSread-only
DESCRIPTION"Can only be FALSE."VARIATION cwaChanRowStatus
SYNTAXINTEGER{ active(1),
notInService(2),
createAndGo(4),
destroy(6)}DESCRIPTION"Does not support createAndWait(5)."--
-- Variations applicable for MPSM155
--VARIATION cwaChanTestIterations
ACCESSnot-implementedDESCRIPTION"Test operation will be executed only once"--
-- Variations applicable for VXSM
--VARIATION cwaChanTestIterations
SYNTAXUnsigned32(1..100)
DEFVAL{1}DESCRIPTION"Write supported with restricted range.
Default value is 1."--
-- Variations applicable for MPSM155
--VARIATION cwaChanStatsEnable
DEFVAL{ true }DESCRIPTION"Stats is enabled by default on MPSM155"--
-- Variations applicable for VXSM
--VARIATION cwaChanOamSegEpEnable
DEFVAL{ nonOamSegEp }DESCRIPTION"default is nonOamSegEp."--
-- Variations applicable for VXSM
--VARIATION cwaChanReroute
ACCESSnot-implementedDESCRIPTION"Object not supported."
--
-- Variations applicable for VXSM
--VARIATION cwaChanIntAbrVSVD
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for VXSM
--VARIATION cwaChanExtAbrVSVD
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for VXSM
--VARIATION cwaChanP2MP
ACCESSnot-implementedDESCRIPTION"Object not supported."--
-- Variations applicable for VXSM
--VARIATION cwaChanMBS
SYNTAXUnsigned32(1..5000000)DEFVAL{1024}
DESCRIPTION"Write supported with restricted range.
Default value is 1024."--
-- Variations applicable for VXSM
--VARIATION cwaChanRemoteMBS
SYNTAXUnsigned32(1..5000000)DEFVAL{1024}DESCRIPTION"Write supported with restricted range.
Default value is 1024."::={ ciscoWanAtmConnCapability 10}END